Your search for "product hydrofort-epoxy-vapour-barrier" was found in 8 product lines, 37 products, 6 resources, 8 industries, and 6 pages.
If you can't find what you're looking for, try a Google-powered search, or contact us.
HydroFort™ VB (Vapour Barrier) is a low VOC water-based epoxy vapour barrier.
HydroFort™ PU is a highly elastic, class 3, single component, liquid applied, polyurethane waterproofing membrane system that complies with AS/NZS 4858. HydroFort™ PU forms a tough, durable membrane...
One component, solvent-free moisture curing rapid drying polyurethane surface membrane primer. Use on cement-based substrates that are not subject to rising damp, but have a residual humidity.
FORTIS COAT 823 HS is a high solid, high build, two-pack epoxy floor coating designed for applications demanding high structural integrity. FORTIS COAT 823 HS is available in colour and clear. Refer...
FORTIS COAT 824 SL is a self-levelling solvent-free two-pack epoxy floor coating designed for build coats from 5mm to 40 mm. FORTIS COAT 824 SL is available in clear for metallic flooring and in...
Fortis AD822 Epoxy Adhesive. Two-Part high Strength Solvent Free Epoxy Adhesive that is easy to mix and apply.
Fortis 822 Ultra Clear is casting resin for crystal clear, high gloss casting applications.
A fast cure solvent-based epoxy primer for concrete substrates before application of topcoats including flake floor. Available in Clear and Light Grey
A high solid clear epoxy primer that reinstates and primes poor concrete surfaces before application the application of topcoats.
Xylene based Thinner for Epoxy Floor coatings
Fortis AquaCoat™ is an ultra-low VOC, high solids, two-pack water-based epoxy floor coating designed for use on concrete floors in areas of pedestrian traffic, light to medium vehicle traffic, and...
Epoxy resin system for filling knots, holes, cracks and other imperfections in rough sawn, dressed or recycled timber.
Fortis Non-Slip Additive embeds into the coating to provide a textured finish which reduces the slip hazard associated with coated floor surfaces. Compatible with many coatings, including all Fortis...
Made of 304 polished stainless steel, Jiffy mixers are perfect for mixing epoxies, polyurethanes & polyaspartic.
600 ml (1:1 & 2:1) 26:1 High Thrust Dual Component Cartridge Gun
Fortis Coat 527 is a two-part non-yellowing polyurethane coating with good chemical resistance and exterior durability.
Fortis UltraCrete™ 3KPU is our urethane-based system is a heavy-duty seamless resurfacer that provides exceptional durability and service.
FORTIS AD5205-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 20 minute open time. It is used for fast processing glue laminated timber.
FORTIS AD5025-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 2-minute open time for finger jointing. It is used for fast processing of finger...
FORTIS AD5045-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 4-minute open time for finger jointing. It is used for fast processing of finger-jointin...
Concrete Shield™ Densifier is a ready to use, potassium and lithium silicate blend used to polish, harden, and seal green or aged concrete. The solution penetrates concrete to react and produce a...
Concrete Shield™ Wet Look Enhancer is ready to use penetrating water and oil repellent based on blended fluorinated polymers in a non-flammable solvent. It has an unusual property in that it dries...
Concrete Shield™ Natural Look Enhancer is ready to use penetrating water and oil repellent based on blended polymers in a non-flammable solvent. It penetrates deeply and reduces capillary absorbency...
FORTIS PRIME 520 water based polyurethane.
Fast-drying, high tack contact spray adhesive with high-temperature resistance
Fast-drying, high tack pressure sensitive contact adhesive.
FORTIS COAT 519 – A premium non-yellowing clear single pack polyurethane floor coating. Specifically designed for use on concrete and timber to provide a long-lasting protective coating that does not...
Fortis AD5205 D4 PU adhesive is a universal, solvent-free, one-component, water-resistant, wood adhesive for all kinds of exterior applications. It is a medium-drying with small amount of foaming.
Concrete Shield™ CCA is a concentrated biodegradable organic acidic cleaning and etching solution for use before coating.
A single component adhesion promoter.
FORTIS AD512 is a universal adhesive paste to glue concrete block, floorboards, strip flooring. yellow tongue, sound-insulating rubber, traffic control tactiles and timber to steel.
A fast curing polyurethane specific for bonding gripper and metal trims to concrete surfaces.
Concrete Shield™ Premium Lithium Densifier is a high performance Nano Lithium Silicate solution with penetration additives for premium polished concrete floor. The nano particle Concrete Shield™...
FORTIS AD5505-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 50-minute open time. It is used where slower layup of the glue lamination is required. I...
FORTIS AD5305-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 30-minute open time. It is used where slower layup of the glue lamination is required. I...
Fortis Adhesives & Coatings Pty Ltd Established in 2008, Fortis setup in Dandenong South, Victoria as an Australian Made and Owned manufacturer of Adhesives, Epoxy Coatings and Non-Yellowing Polyurethane coatings for Melbourne …
Privacy Statement Your privacy is important to FORTIS Adhesives and Coatings. This privacy statement provides information about the personal information that FORTIS Adhesives and Coatings collect, and how FORTIS Adhesives and Coatings …
Use of this internet site is subject to these Terms of Use. Some uses of this site, including the purchase of products or services through this internet site may be subject to …
Concrete Surfaces often suffer from wear and tear, heavy traffic, abrasion, and impact, leading to deterioration over time. In environments like garages, industrial floors, warehouses, and even domestic spaces like carparks and …
Unprotected Concrete such as driveways, pavers, and floors can be easily damaged, with the most common causes including water damage and unwanted staining, as well as general wear and tear. Once the …
Choosing the correct adhesive for woodworking — especially door, window, and stair construction — is essential to ensure longevity, easy-of-use, and the overall aesthetics of the project. There are a huge variety …
Rejection, commonly known, as Silicon Effect is a pullback of a coating applied to a substrate. Rejection of coatings on floor surfaces is typically caused by contaminants. The most common contaminants are: …
The use of Fortis coatings across the varied climates of Australia does provide some challenges. To achieve the best coating, it is always best to follow the product's application guidelines. Temperature, humidity, …
De-lamination of coatings can occur between the coating system and the substrate. Causes of de-lamination The possible causes for de-lamination are: Contamination Inadequate surface preparation Incompatibility 1. Contamination Contamination can be on …
Check out the Fortis Adhesives & Coatings flooring brochure. Click the link to download a copy: Fortis Coating Brochure
For the flooring contractor hired to apply or repair a coating on a concrete floor, the range of tools and possible techniques available for surface preparation can be extensive. Surface preparation methods …
What Causes Hot Tyre Staining (Paw Printing)? Tyres are made of a mixture of synthetic and natural rubbers, fillers and additives. The major fillers are carbon black and silica. Carbon black not …
Polyurethanes are the preferred choice for seamless waterproofing membranes.
When a superior bond strength is required Fortis recommend the use of Epoxy systems.
A complete range of industrial epoxy floor coating systems for factories, carparks and garages.
Epoxy and Polyurethane Thinners slow the cure of coatings and reduce the viscosity.
Structural Polyurethane Lamination Adhesive for glulam producers.
BACK TO TOP